Bean 생명주기와 콜백
Last updated
Last updated
스프링 빈은 객체생성 -> 의존관계주입의 라이프사이클을 가진다. (생성자 주입의 경우 예외)
스프링 빈은 객체를 생성하고, 의존관계 주입이 다 끝난 후에 필요한 데이터를 사용할 수 있는 준비가 완료된다. 따라서 의존관계 주입이 모두 완료되고 난 후에 초기화가 호출되야한다.
스프링은 의존관계 주입이 완료되면 스프링 빈에 콜백 메서드를 통해서 초기화 시점을 알려주는 다양한 기능을 제공한다.
스프링 컨테이너가 종료되기 직전에 소멸 콜백을 준다.
스프링 컨테이너 생성
스프링 빈 생성
의존관계 주입
초기화 콜백 : 빈이 생성되고, 빈의 의존관계 주입이 완료된 후
사용
소멸전 콜백 : 빈이 소멸되기 직전에 호출
스프링 종료
생성자는 필수 정보를 받고, 메모리를 할당해서 객체를 생성하는 책임을 가진다.
초기화는 이렇게 생성된 값을 활용해서 외부 커넥션을 연결하는 등 무거운 동작을 수행한다.
즉, 생성자 안에서 초기화 작업을 함께 하는 것 보다는 객체를 생성하는 부분과 초기화 하는 부분은 명확하게 나누는 것이 유지보수 관점에 좋다.
InitializingBean, DisposableBean 을 구현하여, 초기화 메서드와 소멸 메서드를 설정할 수 있다.
InitializingBean
public interface InitializingBean {
/**
* Invoked by the containing {@code BeanFactory} after it has set all bean properties
* and satisfied {@link BeanFactoryAware}, {@code ApplicationContextAware} etc.
* <p>This method allows the bean instance to perform validation of its overall
* configuration and final initialization when all bean properties have been set.
* @throws Exception in the event of misconfiguration (such as failure to set an
* essential property) or if initialization fails for any other reason
*/
void afterPropertiesSet() throws Exception;
}DisposableBean
public interface DisposableBean {
/**
* Invoked by the containing {@code BeanFactory} on destruction of a bean.
* @throws Exception in case of shutdown errors. Exceptions will get logged
* but not rethrown to allow other beans to release their resources as well.
*/
void destroy() throws Exception;
}예제 클래스
package dh0023.springcore.lifecycle;
import org.springframework.beans.factory.DisposableBean;
import org.springframework.beans.factory.InitializingBean;
/**
* 테스트를 위한 가짜 NetworkClient
*/
public class NetworkClient implements InitializingBean, DisposableBean {
private String url;
public NetworkClient() {
System.out.println("생성자 호출, url = " + url);
}
public void setUrl(String url) {
this.url = url;
}
// start service
public void connect() {
System.out.println("connect: " + url);
}
public void call(String message) {
System.out.println("call: " + url + " message = " + message);
}
public void disconnect() {
System.out.println("close: " + url);
}
/**
* 의존관계 주입 후 호출
* @throws Exception
*/
@Override
public void afterPropertiesSet() throws Exception {
System.out.println("NetworkClient.afterPropertiesSet");
connect();
call("초기화 연결 메세지");
}
/**
* 소멸직후 콜백
* @throws Exception
*/
@Override
public void destroy() throws Exception {
System.out.println("NetworkClient.destroy");
disconnect();
}
}Test Code
package dh0023.springcore.lifecycle;
import org.junit.jupiter.api.Test;
import org.springframework.context.ConfigurableApplicationContext;
import org.springframework.context.annotation.AnnotationConfigApplicationContext;
import org.springframework.context.annotation.Bean;
import org.springframework.context.annotation.Configuration;
import org.springframework.context.annotation.Description;
public class BeanLifeCycleTest {
@Test
@Description("인터페이스 적용 테스트")
void lifeCycleInterfaceTest() {
ConfigurableApplicationContext ac = new AnnotationConfigApplicationContext(LifeCycleConfig.class);
NetworkClient client = ac.getBean(NetworkClient.class);
ac.close();
}
@Configuration
static class LifeCycleConfig {
@Bean
public NetworkClient networkClient() {
NetworkClient networkClient = new NetworkClient();
networkClient.setUrl("http://spring-core.dev");
return networkClient;
}
}
}결과
23:23:39.553 [main] DEBUG org.springframework.beans.factory.support.DefaultListableBeanFactory - Creating shared instance of singleton bean 'networkClient'
생성자 호출, url = null
NetworkClient.afterPropertiesSet
connect: http://spring-core.dev
call: http://spring-core.dev message = 초기화 연결 메세지
23:23:39.645 [main] DEBUG org.springframework.context.annotation.AnnotationConfigApplicationContext - Closing org.springframework.context.annotation.AnnotationConfigApplicationContext@932bc4a, started on Sun May 16 23:23:38 KST 2021
NetworkClient.destroy
close: http://spring-core.dev
Process finished with exit code 0Creating shared instance of singleton bean 'networkClient'
생성자 호출
NetworkClient.afterPropertiesSet
Closing org.springframework.context.annotation.AnnotationConfigApplicationContext@932bc4a
NetworkClient.destroy
스프링 종료
다음과 같은 순서로 사이클이 수행되는 것을 확인할 수 있다.
스프링 전용 인터페이스이다. 해당 코드가 스프링 전용 인터페이스에 의존하게 된다.
초기화, 소멸 메서드의 이름을 변경할 수 없다.
외부 라이브러리에 적용할 수 없다.
이 방법은 초창기 나온 방법으로, 현재는 거의 사용하지 않는다.
@Bean 어노테이션에 등록 초기화, 소멸 메서드를 설정하는 방법이다.
예제 클래스
/**
* 테스트를 위한 가짜 NetworkClient
*/
public class NetworkClientMethod {
private String url;
public NetworkClientMethod() {
System.out.println("생성자 호출, url = " + url);
}
public void setUrl(String url) {
this.url = url;
}
// start service
public void connect() {
System.out.println("connect: " + url);
}
public void call(String message) {
System.out.println("call: " + url + " message = " + message);
}
public void disconnect() {
System.out.println("close: " + url);
}
public void init() {
System.out.println("NetworkClientMethod.init");
connect();
call("초기화 연결 메세지");
}
public void close() {
System.out.println("NetworkClientMethod.close");
disconnect();
}
}테스트 코드
package dh0023.springcore.lifecycle;
import org.junit.jupiter.api.Test;
import org.springframework.context.ConfigurableApplicationContext;
import org.springframework.context.annotation.AnnotationConfigApplicationContext;
import org.springframework.context.annotation.Bean;
import org.springframework.context.annotation.Configuration;
import org.springframework.context.annotation.Description;
public class BeanLifeCycleTest {
@Test
@Description("메서드 적용 테스트")
void lifeCycleMethodTest() {
ConfigurableApplicationContext ac = new AnnotationConfigApplicationContext(LifeCycleConfig.class);
NetworkClientMethod client = ac.getBean(NetworkClientMethod.class);
ac.close();
}
@Configuration
static class LifeCycleConfig {
@Bean(initMethod = "init", destroyMethod = "close")
public NetworkClientMethod networkClientMethod() {
NetworkClientMethod networkClientMethod = new NetworkClientMethod();
networkClientMethod.setUrl("http://spring-core.dev");
return networkClientMethod;
}
}
}결과
23:35:00.964 [main] DEBUG org.springframework.beans.factory.support.DefaultListableBeanFactory - Creating shared instance of singleton bean 'networkClientMethod'
생성자 호출, url = null
NetworkClientMethod.init
connect: http://spring-core.dev
call: http://spring-core.dev message = 초기화 연결 메세지
23:35:01.128 [main] DEBUG org.springframework.context.annotation.AnnotationConfigApplicationContext - Closing org.springframework.context.annotation.AnnotationConfigApplicationContext@932bc4a, started on Sun May 16 23:35:00 KST 2021
NetworkClientMethod.close
close: http://spring-core.dev
Process finished with exit code 0Creating shared instance of singleton bean 'networkClientMethod'
생성자 호출
초기화 콜백 : NetworkClientMethod.init
Closing org.springframework.context.annotation.AnnotationConfigApplicationContext@932bc4a
소멸직후 콜백 : NetworkClientMethod.close
스프링 종료
메서드 이름을 자유롭게 줄 수 있다.
스프링 빈이 스프링 코드에 의존하지 않는다.
설정 정보를 사용하기 때문에 코드를 고칠 수 없는 외부 라이브러리에도 초기화, 종료 메서드를 적용할 수 있다.
라이브러리 대부분 close, shutdown 과 같은 이름의 종료 메서드를 사용한다.
String destroyMethod() default AbstractBeanDefinition.INFER_METHOD;public static final String INFER_METHOD = "(inferred)";destoryMethod() 의 default값은 (inferred) 로 등록되어 있다. 이 추론 기능은 close, shutdown 과 같은 이름의 메서드를 자동으로 호출해준다. 이름 그대로 종료 메서드를 추론해서 호출해주는 것이다.
따라서 직접 스프링 빈으로 등록하면 종료 메서드는 따로 적어주지 않아도 된다. 만약 추론기능을 사용하기 싫은 경우에는 destroyMethod="" 로 설정해주면 된다.
@PostConstruct
package javax.annotation;
import java.lang.annotation.*;
import static java.lang.annotation.ElementType.*;
import static java.lang.annotation.RetentionPolicy.*;
/**
* The <code>PostConstruct</code> annotation is used on a method that
* needs to be executed after dependency injection is done to perform
* any initialization. This method must be invoked before the class
* is put into service. This annotation must be supported on all classes
* that support dependency injection. The method annotated with
* <code>PostConstruct</code> must be invoked even if the class does
* not request any resources to be injected. Only one
* method in a given class can be annotated with this annotation.
* The method on which the <code>PostConstruct</code> annotation is
* applied must fulfill all of the following criteria:
* <ul>
* <li>The method must not have any parameters except in the case of
* interceptors in which case it takes an <code>InvocationContext</code>
* object as defined by the Interceptors specification.</li>
* <li>The method defined on an interceptor class or superclass of an
* interceptor class must have one of the following signatures:
* <p>
* void <METHOD>(InvocationContext)
* <p>
* Object <METHOD>(InvocationContext) throws Exception
* <p>
* <i>Note: A PostConstruct interceptor method must not throw application
* exceptions, but it may be declared to throw checked exceptions including
* the java.lang.Exception if the same interceptor method interposes on
* business or timeout methods in addition to lifecycle events. If a
* PostConstruct interceptor method returns a value, it is ignored by
* the container.</i>
* </li>
* <li>The method defined on a non-interceptor class must have the
* following signature:
* <p>
* void <METHOD>()
* </li>
* <li>The method on which the <code>PostConstruct</code> annotation
* is applied may be public, protected, package private or private.</li>
* <li>The method must not be static except for the application client.</li>
* <li>The method should not be final.</li>
* <li>If the method throws an unchecked exception the class must not be put into
* service except in the case where the exception is handled by an
* interceptor.</li></ul>
*
* @see javax.annotation.PreDestroy
* @see javax.annotation.Resource
* @since 1.6, Common Annotations 1.0
*/
@Documented
@Retention (RUNTIME)
@Target(METHOD)
public @interface PostConstruct {
}@PreDestroy
package javax.annotation;
import java.lang.annotation.*;
import static java.lang.annotation.ElementType.*;
import static java.lang.annotation.RetentionPolicy.*;
/**
* The <code>PreDestroy</code> annotation is used on a method as a
* callback notification to signal that the instance is in the
* process of being removed by the container. The method annotated
* with <code>PreDestroy</code> is typically used to
* release resources that it has been holding. This annotation must be
* supported by all container-managed objects that support the use of
* the <code>PostConstruct</code> annotation except the Jakarta EE application
* client. The method on which the <code>PreDestroy</code> annotation
* is applied must fulfill all of the following criteria:
* <ul>
* <li>The method must not have any parameters except in the case of
* interceptors in which case it takes an <code>InvocationContext</code>
* object as defined by the Interceptors specification.</li>
* <li>The method defined on an interceptor class or superclass of an
* interceptor class must have one of the following signatures:
* <p>
* void <METHOD>(InvocationContext)
* <p>
* Object <METHOD>(InvocationContext) throws Exception
* <p>
* <i>Note: A PreDestroy interceptor method must not throw application
* exceptions, but it may be declared to throw checked exceptions including
* the java.lang.Exception if the same interceptor method interposes on
* business or timeout methods in addition to lifecycle events. If a
* PreDestroy interceptor method returns a value, it is ignored by
* the container.</i>
* </li>
* <li>The method defined on a non-interceptor class must have the
* following signature:
* <p>
* void <METHOD>()
* </li>
* <li>The method on which PreDestroy is applied may be public, protected,
* package private or private.</li>
* <li>The method must not be static.</li>
* <li>The method should not be final.</li>
* <li>If the method throws an unchecked exception it is ignored by
* the container.</li>
* </ul>
*
* @see javax.annotation.PostConstruct
* @see javax.annotation.Resource
* @since 1.6, Common Annotations 1.0
*/
@Documented
@Retention (RUNTIME)
@Target(METHOD)
public @interface PreDestroy {
}테스트 클래스
package dh0023.springcore.lifecycle;
import org.springframework.beans.factory.DisposableBean;
import org.springframework.beans.factory.InitializingBean;
import javax.annotation.PostConstruct;
import javax.annotation.PreDestroy;
/**
* 테스트를 위한 가짜 NetworkClient
*/
public class NetworkClient {
private String url;
public NetworkClient() {
System.out.println("생성자 호출, url = " + url);
}
public void setUrl(String url) {
this.url = url;
}
// start service
public void connect() {
System.out.println("connect: " + url);
}
public void call(String message) {
System.out.println("call: " + url + " message = " + message);
}
public void disconnect() {
System.out.println("close: " + url);
}
/**
* 의존관계 주입 후 호출
* @throws Exception
*/
@PostConstruct
public void init() throws Exception {
System.out.println("NetworkClient.init");
connect();
call("초기화 연결 메세지");
}
/**
* 소멸직전 콜백
* @throws Exception
*/
@PreDestroy
public void close() throws Exception {
System.out.println("NetworkClient.close");
disconnect();
}
}테스트 코드
package dh0023.springcore.lifecycle;
import org.junit.jupiter.api.Test;
import org.springframework.context.ConfigurableApplicationContext;
import org.springframework.context.annotation.AnnotationConfigApplicationContext;
import org.springframework.context.annotation.Bean;
import org.springframework.context.annotation.Configuration;
import org.springframework.context.annotation.Description;
public class BeanLifeCycleTest {
@Test
@Description("어노테이션 방 적용 테스트")
void lifeCycleTest() {
ConfigurableApplicationContext ac = new AnnotationConfigApplicationContext(LifeCycleConfig.class);
NetworkClient client = ac.getBean(NetworkClient.class);
ac.close();
}
@Configuration
static class LifeCycleConfig {
@Bean
public NetworkClient networkClient() {
NetworkClient networkClient = new NetworkClient();
networkClient.setUrl("http://spring-core.dev");
return networkClient;
}
}
}결과
23:50:43.425 [main] DEBUG org.springframework.beans.factory.support.DefaultListableBeanFactory - Creating shared instance of singleton bean 'networkClient'
생성자 호출, url = null
NetworkClient.init
connect: http://spring-core.dev
call: http://spring-core.dev message = 초기화 연결 메세지
23:50:43.557 [main] DEBUG org.springframework.context.annotation.AnnotationConfigApplicationContext - Closing org.springframework.context.annotation.AnnotationConfigApplicationContext@932bc4a, started on Sun May 16 23:50:42 KST 2021
NetworkClient.destroy
close: http://spring-core.dev최신 스프링에서 가장 권장하는 방법
애노테이션만 붙이면 되므로 매우 편리
javax.annotation 패키지는 스프링 종속적인 기술이 아니라 자바 표준이다. 따라서, 스프링이 아닌 다른 컨테이너에서도 동작한다.
외부 라이브러리에 적용하지 못한다. 외부 라이브러리를 초기화/종료 해야하면 @Bean 의 기능을 사용해야한다.
